feat(statemachine): 提交数组重组的Processor相关,与探针交互无关

补全数据流注释，部分流的字段的注释后续补充

See merge request project/proto/dataflow!7

ApmBaseDataFlow.proto

@@ -13,42 +13,42 @@ package dataflow;
 message ApmBaseDataFlow {
 
     int32 table_id = 1;					//编号28
-    uint32 probe_if = 2;
-    uint32 tuple_source = 3;
-    uint32 tuple_dest = 4;
-    IPAddress tuple_saddr = 5;
-    IPAddress tuple_daddr = 6;
-    string src_mac = 7;
-    string dst_mac = 8;
-    uint32 vlan_id = 9;
-    uint32 start_tm_tv_sec = 10;
-    uint32 start_tm_tv_usec = 11;
-    uint32 total_bytes = 12;
-    uint32 total_packets = 13;
-    uint32 total_drop_packets = 14;
-    uint32 retran_time_delay = 15;
-    uint32 client_rtt = 16;
-    uint32 server_rtt = 17;
-    uint32 user_response_time = 18;
-    uint32 server_response_time = 19;
-    uint32 con_fail = 20;
-    uint32 bytes_in = 21;
-    uint32 bytes_out = 22;
-    uint32 time_flag = 23;
-    uint32 end_tm_tv_sec = 24;
-    uint32 end_tm_tv_usec = 25;
-    uint32 respon_num = 26;
-    uint32 cs_window = 27;
-    uint32 sc_window = 28;
-    uint32 cs_reset = 29;
-    uint32 sc_reset = 30;
-    uint32 cs_retran = 31;
-    uint32 sc_retran = 32;
-    uint32 conn_setup_tm = 33;
-    uint32 new_session = 34;
-    uint32 cs_alert = 35;
-    uint32 sc_alert = 36;
-    string protocol = 37;
+    uint32 probe_if = 2;				//探针抓包口
+    uint32 tuple_source = 3;			//四元组-源端口
+    uint32 tuple_dest = 4;				//四元组-目的端口
+    IPAddress tuple_saddr = 5;			//四元组-源ip地址
+    IPAddress tuple_daddr = 6;			//四元组-目的ip地址
+    string src_mac = 7;					//源mac地址
+    string dst_mac = 8;					//目的mac地址
+    uint32 vlan_id = 9;					//链路编号
+    uint32 start_tm_tv_sec = 10;		//开始时间(秒)
+    uint32 start_tm_tv_usec = 11;		//开始时间(微秒)
+    uint32 total_bytes = 12;			//总字节数
+    uint32 total_packets = 13;			//总包数
+    uint32 total_drop_packets = 14;		//总丢包数
+    uint32 retran_time_delay = 15;		//重传延时
+    uint32 client_rtt = 16;				//客户端rtt
+    uint32 server_rtt = 17;				//服务端rtt
+    uint32 user_response_time = 18;		//用户响应时间
+    uint32 server_response_time = 19;	//服务端响应时间
+    uint32 con_fail = 20;				//tcp会话连接失败数
+    uint32 bytes_in = 21;				//服务端总字节数
+    uint32 bytes_out = 22;				//客户端总字节数
+    uint32 time_flag = 23;				//探针推送数据时间
+    uint32 end_tm_tv_sec = 24;			//结束时间(秒)
+    uint32 end_tm_tv_usec = 25;			//结束时间(微秒)
+    uint32 respon_num = 26;				//总响应数
+    uint32 cs_window = 27;				//客户端零窗口数
+    uint32 sc_window = 28;				//服务端零窗口数
+    uint32 cs_reset = 29;				//客户端重置数
+    uint32 sc_reset = 30;				//服务端重置数
+    uint32 cs_retran = 31;				//客户端重传数
+    uint32 sc_retran = 32;				//服务端重传数
+    uint32 conn_setup_tm = 33;			//会话建立时间【三次握手时间】
+    uint32 new_session = 34;			//新建会话数
+    uint32 cs_alert = 35;				//
+    uint32 sc_alert = 36;				//
+    bytes protocol = 37;				//协议类型
 
 }
 

AppFlow.proto

@@ -11,27 +11,27 @@ package dataflow;
 
 message AppFlow { 
     int32 table_id = 1;			//编号17
-    IPAddress src_ip = 2;
-    uint32 src_port = 3;
-    IPAddress dst_ip = 4;
-    uint32 dst_port = 5;
-    uint32 s_tv_sec = 6;
-    uint32 s_tv_usec = 7;
-    uint32 l_tv_sec = 8;
-    uint32 l_tv_usec = 9;
-    uint32 e_tv_sec = 10;
-    uint32 e_tv_usec = 11;
-    uint32 input_packets = 12;
-    uint32 output_packets = 13;
-    uint32 input_bytes = 14;
-    uint32 output_bytes = 15;
-    string protocol = 16;
-    uint32 app_id = 17;
-    uint32 app_group_id = 18;
-    uint32 probe_if = 19;
-    uint32 app_style = 20;
-    uint32 time_flag = 21;
-    int32 vlan_id = 22;
-    int32 mpls_label = 23;
-    int32 tos = 24;
+    IPAddress src_ip = 2;		//< source ip
+    uint32 src_port = 3;		//< source port
+    IPAddress dst_ip = 4;		//< destination  ip
+    uint32 dst_port = 5;		//< destination port
+    uint32 s_tv_sec = 6;		//< start time
+    uint32 s_tv_usec = 7;		//< start time
+    uint32 l_tv_sec = 8;		//< last update time
+    uint32 l_tv_usec = 9;		//< last update time
+    uint32 e_tv_sec = 10;		//< end time
+    uint32 e_tv_usec = 11;		//< end time
+    uint32 input_packets = 12;	//< input packets (dst->src)
+    uint32 output_packets = 13;	//< output packets (src->dst)
+    uint32 input_bytes = 14;	//< input bytes  (dst->src)
+    uint32 output_bytes = 15;	//< output bytes (src->dst)
+    bytes protocol = 16;		//< protocol
+    uint32 app_id = 17;			//< application idectification
+    uint32 app_group_id = 18;	//< application group idectification
+    uint32 probe_if = 19;		//探针编号
+    uint32 app_style = 20;		//< application style
+    uint32 time_flag = 21;		// <time flag
+    int32 vlan_id = 22;			//链路编号
+    int32 mpls_label = 23;		//
+    int32 tos = 24;				//服务类型
 }

BacktrackingFlow.proto

@@ -12,22 +12,22 @@ package dataflow;
 message BacktrackingFlow {
 
     int32 table_id = 1;			//编号20
-	int64 mac_src = 2;
-	int64 mac_dst = 3;
-	IPAddress ip_src = 4;
-	IPAddress ip_dst = 5;
-	int32 port_src = 6;
-	int32 port_dst = 7;
-	int32 l3_proto = 8;
-	int32 l4_proto = 9;
-	int32 tos = 10;
-	int32 vlan_id = 11;
-	uint64 bytes = 12;
-	uint64 packets = 13;
-	uint64 tcp_sp = 14;
-	uint64 tcp_scpn = 15;
-	uint64 tcp_srp = 16;
-	uint32 app_id = 17;
-	uint32 app_group_id = 18;
-	int32 mpls_label = 19;
+	int64 mac_src = 2;			//源MAC
+	int64 mac_dst = 3;			//目标MAC
+	IPAddress ip_src = 4;		//源IP
+	IPAddress ip_dst = 5;		//目标IP
+	int32 port_src = 6;			//源端口，如果没有，为-1
+	int32 port_dst = 7;			//目标端口，如果没有，为-1
+	int32 l3_proto = 8;			//第三层协议ID，如果没有，为-1
+	int32 l4_proto = 9;			//第四层协议ID，如果没有，为-1
+	int32 tos = 10;				//Tos，一个字节，如果没有，为-1
+	int32 vlan_id = 11;			//vlan ID，如果没有，为-1
+	uint64 bytes = 12;			//字节总数
+	uint64 packets = 13;		//数据包总数
+	uint64 tcp_sp = 14;			//TCP同步包数
+	uint64 tcp_scpn = 15;		//TCP同步确认包数
+	uint64 tcp_srp = 16;		//TCP同步重置包数
+	uint32 app_id = 17;			//< application idectification
+	uint32 app_group_id = 18;	//< application group idectification
+	int32 mpls_label = 19;		//
 }

BussFlowDb.proto

@@ -13,54 +13,54 @@ package dataflow;
 message BussFlowDb {
 
 int32    table_id = 1;							//编号24
-uint32 msg_type = 2;
-string msg_version = 3;
-uint32 msg_seq = 4;
-uint32 msg_len = 5;
-uint64 src_mac = 6;
-uint64 dst_mac = 7;
-uint32 vlan_id = 8;
-uint32 tos = 9;
-uint32 retran_count = 10;
-uint32 reset_count = 11;
-uint32 zerowin_count = 12;
-uint32 protocol = 13;
-uint32 response_bytes = 14;
-uint32 request_bytes = 15;
-uint32 response_packets = 16;
-uint32 request_packets = 17;
-string seq_ack = 18;
-uint32 recog_status = 19;
-uint32 probe_if = 20;
-string channel = 21;
-string dbname = 22;
-IPAddress request_ip = 23;
-uint32 request_port = 24;
-IPAddress response_ip = 25;
-uint32 response_port = 26;
-int64 status = 27;
-int64 server_translate_time = 28;
-int64 client_translate_time = 29;
-int64 server_response_time = 30;
-uint32 server_response_start_time_tv_sec = 31;
-uint32 server_response_start_time_tv_usec = 32;
-uint32 server_response_end_time_tv_sec = 33;
-uint32 server_response_end_time_tv_usec = 34;
-uint32 start_time_tv_sec = 35;
-uint32 start_time_tv_usec = 36;
-uint32 end_time_tv_sec = 37;
-uint32 end_time_tv_usec = 38;
-int32 is_uncomplete = 39;
-uint32 time_flag = 40;
-uint32 sql_len = 41;
-uint32 detail_msg_len = 42;
-uint32 req_len = 43;
-uint32 res_len = 44;
-uint32 reserved_len = 45;
-string sql = 46;
-string bussiness_detail_mesg = 47;
-string req_data = 48;
-string res_data = 49;
-string reserved = 50;
+uint32 msg_type = 2;							//消息类型
+bytes msg_version = 3;							//数据库版本
+uint32 msg_seq = 4;								//消息的序列号
+uint32 msg_len = 5;								//消息长度
+uint64 src_mac = 6;								//源端口物理地址
+uint64 dst_mac = 7;								//目的端口物理地址
+uint32 vlan_id = 8;								//链路编号
+uint32 tos = 9;									//服务类型
+uint32 retran_count = 10						//重传数据量
+uint32 reset_count = 11;						//重置数据量
+uint32 zerowin_count = 12;						//零窗数据量
+uint32 protocol = 13;							//协议类型
+uint32 response_bytes = 14;						//输入字节数
+uint32 request_bytes = 15;						//输出字节数
+uint32 response_packets = 16;					//输入数据报个数
+uint32 request_packets = 17;					//输出数据报个数
+bytes seq_ack = 18;								//序列号和响应序号
+uint32 recog_status = 19;						//
+uint32 probe_if = 20;							//探针编号
+string channel = 21;							//通道
+string dbname = 22;								//数据库名称
+IPAddress request_ip = 23;						//请求ip地址
+uint32 request_port = 24;						//请求端口
+IPAddress response_ip = 25;						//响应ip地址
+uint32 response_port = 26;						//响应端口
+int64 status = 27;								//状态
+int64 server_translate_time = 28;				//服务端传输时间
+int64 client_translate_time = 29;				//客户端传输时间
+int64 server_response_time = 30;				//服务端传输时间
+uint32 server_response_start_time_tv_sec = 31;	//服务端开始响应的时间(秒)
+uint32 server_response_start_time_tv_usec = 32;	//服务端开始响应的时间(微秒)
+uint32 server_response_end_time_tv_sec = 33;	//服务端结束响应的时间(秒)
+uint32 server_response_end_time_tv_usec = 34;	//服务端结束响应的时间(微秒)
+uint32 start_time_tv_sec = 35;					//会话开始时间(秒)
+uint32 start_time_tv_usec = 36;					//会话开始时间(微秒)
+uint32 end_time_tv_sec = 37;					//会话结束时间(秒)
+uint32 end_time_tv_usec = 38;					//会话结束时间(微秒)
+int32 is_uncomplete = 39;						//数据是否完整标志
+uint32 time_flag = 40;							//时间戳
+uint32 sql_len = 41;							//sql字段的长度值
+uint32 detail_msg_len = 42;						//专属指标值得长度
+uint32 req_len = 43;							//请求的数据 长度
+uint32 res_len = 44;							//响应的数据长度
+uint32 reserved_len = 45;						//保留字段长度
+bytes sql = 46;									//sql语句
+bytes bussiness_detail_mesg = 47;				//专属指标值
+bytes req_data = 48;							//请求详情报文
+bytes res_data = 49;							//响应详情报文
+bytes reserved = 50;							//保留字段值
 
 }

BussFlowExternal.proto

@@ -11,34 +11,34 @@ package dataflow;
 
 message BussFlowExternal {
     int32  table_id = 1;			//编号25
-    uint32 msg_type = 2;
-    uint32 msg_version = 3;
-    uint32 msg_seq = 4;
-    uint32 msg_len = 5;
-    uint64 src_mac = 6;
-    uint64 dst_mac = 7;
-    IPAddress request_ip = 8;
-    uint32 request_port = 9;
-    IPAddress response_ip = 10;
-    uint32 response_port = 11;
-    uint32 probeif = 12;
-    uint32 protocol = 13;
-    uint32 start_time_tv_sec = 14;
-    uint32 start_time_tv_usec = 15;
-    uint32 end_time_tv_sec = 16;
-    uint32 end_time_tv_usec = 17;
-    uint32 req_len = 18;
-    uint32 res_len = 19;
-    uint32 busi_msg_len = 20;
-    uint32 key_msg_len = 21;
-    uint32 detail_msg_len = 22;
-    uint32 remain_len = 23;
-    string busi_code = 24;
-    string sessionid = 25;
-    string req_data = 26;
-    string res_data = 27;
-    string busi_msg = 28;
-    string busi_key_msg = 29;
-    string busi_detail_msg = 30;
-    string remain_data = 31;
+    uint32 msg_type = 2;			//消息类型
+    uint32 msg_version = 3;			//数据库版本
+    uint32 msg_seq = 4;				//消息的序列号
+    uint32 msg_len = 5;				//消息的长度
+    uint64 src_mac = 6;				//源端口物理地址
+    uint64 dst_mac = 7;				//目的端口物理地址
+    IPAddress request_ip = 8;		//请求ip地址
+    uint32 request_port = 9;		//请求端口
+    IPAddress response_ip = 10;		//响应ip地址
+    uint32 response_port = 11;		//响应端口
+    uint32 probeif = 12;			//探针编号
+    uint32 protocol = 13;			//协议类型
+    uint32 start_time_tv_sec = 14;	//开始时间（秒）
+    uint32 start_time_tv_usec = 15;	//开始时间（微秒）
+    uint32 end_time_tv_sec = 16;	//结束时间（秒）
+    uint32 end_time_tv_usec = 17;	//结束时间（微秒）
+    uint32 req_len = 18;			//请求数据长度
+    uint32 res_len = 19;			//响应数据报长度
+    uint32 busi_msg_len = 20;		//bussiness resouce data length
+    uint32 key_msg_len = 21;		//sub bussiness resouce data length
+    uint32 detail_msg_len = 22;		//parents bussiness data length
+    uint32 remain_len = 23;			//reserve data length
+    bytes busi_code = 24;			//
+    bytes sessionid = 25;			//
+    bytes req_data = 26;			//请求详情报文
+    bytes res_data = 27;			//响应详情报文
+    bytes busi_msg = 28;			//
+    bytes busi_key_msg = 29;		//区分子业务参数
+    bytes busi_detail_msg = 30;		//专属指标
+    bytes remain_data = 31;			//保留字段
 }

BussFlowMidd.proto

@@ -12,12 +12,12 @@ package dataflow;
 message BussFlowMidd {
     int32 table_id = 1;								//编号23
     uint32 msg_type = 2;							//消息类型
-    string msg_version = 3;	//数据库版本
+    bytes msg_version = 3;							//数据库版本
     uint32 msg_seq = 4;								//消息的序列号
     uint32 msg_len = 5;								//消息的长度
     uint64 src_mac = 6;								//源端口物理地址
     uint64 dst_mac = 7;								//目的端口物理地址
-    uint32 vlan_id = 8;
+    uint32 vlan_id = 8;								//链路编号
     uint32 tos = 9;									//服务类型
     uint32 retran_count = 10;						//重传数据量
     uint32 reset_count = 11;						//重置数据量
@@ -27,39 +27,39 @@ message BussFlowMidd {
     uint32 request_bytes = 15;						//输出字节数
     uint32 response_packets = 16;					//输入数据报个数
     uint32 request_packets = 17;					//输出数据报个数
-    string seq_ack = 18;	//序列号和响应序号
-    uint32 recog_status = 19;	
+    bytes seq_ack = 18;								//序列号和响应序号
+    uint32 recog_status = 19;						//
     uint32 probe_if = 20;							//探针编号
-    string channel = 21;	//通道
-    IPAddress request_ip = 22;	//请求地址
+    bytes channel = 21;								//通道
+    IPAddress request_ip = 22;						//请求ip地址
     uint32 request_port = 23;						//请求端口
-    IPAddress response_ip = 24;	//响应地址
+    IPAddress response_ip = 24;						//响应ip地址
     uint32 response_port = 25;						//响应端口
     uint32 start_time_tv_sec = 26;					//开始时间（秒）
-    uint32 start_time_tv_usec = 27;	//开始时间（毫秒）
+    uint32 start_time_tv_usec = 27;					//开始时间（微秒）
     uint32 end_time_tv_sec = 28;					//结束时间（秒）
-    uint32 end_time_tv_usec = 29;	//结束时间（毫秒）
-    uint32 deal_state = 30;	
+    uint32 end_time_tv_usec = 29;					//结束时间（微秒）
+    uint32 deal_state = 30;							//
     uint32 server_res_code = 31;					//服务器返回状态
     int64 server_translate_time = 32;				//服务器传输时间
     uint32 server_response_start_time_tv_sec = 33;	//服务器响应开始时间（秒）
-    uint32 server_response_start_time_tv_usec = 34;	//服务器响应开始时间（毫秒）
+    uint32 server_response_start_time_tv_usec = 34;	//服务器响应开始时间（微秒）
     uint32 server_response_end_time_tv_sec = 35;	//服务器响应结束时间（秒）
-    uint32 server_response_end_time_tv_usec = 36;	//服务器响应结束时间（毫秒）
+    uint32 server_response_end_time_tv_usec = 36;	//服务器响应结束时间（微秒）
     int64 server_response_time = 37;				//服务器响应时长
-    int64 client_translate_time = 38;	//客户传输时间
+    int64 client_translate_time = 38;				//客户端响应时长
     int32 is_uncomplete = 39;						//数据完整标志
     uint32 time_flag = 40;							//时间戳
-    uint32 detail_msg_len = 41;	//业务纤细信息长度
-    uint32 key_msg_len = 42;	//业务关键字长度
-    uint32 api_len = 43;	//应用名称长度
-    uint32 req_len = 44;	//请求详情报文长度
-    uint32 res_len = 45;	//响应详情报文长度
-    uint32 remain_len = 46;
-    string bussiness_detail_mesg = 47;	//业务纤细信息
-    string bussiness_key_mesg = 48;	//业务关键字
-    string api = 49;	//应用名称
-    string req_data = 50;	//请求详情报文
-    string res_data = 51;	//响应详情报文
-    string remain_data = 52;
+    uint32 detail_msg_len = 41;						//专属指标值长度
+    uint32 key_msg_len = 42;						//区分子业务参数值长度
+    uint32 api_len = 43;							//接口名称长度
+    uint32 req_len = 44;							//请求数据报文长度
+    uint32 res_len = 45;							//响应数据报文长度
+    uint32 remain_len = 46;							//保留字段长度
+    bytes bussiness_detail_mesg = 47;				//专属指标
+    bytes bussiness_key_mesg = 48;					//区分子业务参数
+    bytes api = 49;									//接口名称
+    bytes req_data = 50;							//请求详情报文
+    bytes res_data = 51;							//响应详情报文
+    bytes remain_data = 52;							//保留字段
 }

BussFlowWeb.proto

@@ -12,12 +12,12 @@ package dataflow;
 message BussFlowWeb {
     int32 table_id = 1;								//编号22
     uint32 msg_type = 2;							//消息类型
-    string msg_version = 3;	//数据库版本
+    bytes msg_version = 3;							//数据库版本
     uint32 msg_seq = 4;								//消息的序列号
     uint32 msg_len = 5;								//消息长度
     uint64 src_mac = 6;								//源端口物理地址
     uint64 dst_mac = 7;								//目的端口物理地址
-    uint32 vlan_id = 8;	
+    uint32 vlan_id = 8;								//链路编号
     uint32 tos = 9;									//服务类型	
     uint32 retran_count = 10;						//重传数据量
     uint32 reset_count = 11;						//重置数据量
@@ -27,52 +27,52 @@ message BussFlowWeb {
     uint32 request_bytes = 15;						//输出字节数
     uint32 response_packets = 16;					//输入数据报个数
     uint32 request_packets = 17;					//输出数据报个数
-    string seq_ack = 18;	//序列号和响应序号
-    uint32 recog_status = 19;	
+    bytes seq_ack = 18;								//序列号和响应序号
+    uint32 recog_status = 19;						//
     uint32 req_method = 20;							//请求方法
-    string content_type = 21;	//请求内容
-    string accept = 22;	//接受
+    bytes content_type = 21;						//请求数据类型
+    bytes accept = 22;								//接受
     uint32 probe_if = 23;							//探针编号
-    string channel = 24;	//业务类型
-    string sessionid = 25;	//会话id
+    bytes channel = 24;								//通道
+    bytes sessionid = 25;							//会话id
     IPAddress request_ip = 26;						//请求ip地址
     uint32 request_port = 27;						//请求端口
     IPAddress response_ip = 28;						//响应ip地址
     uint32 response_port = 29;						//响应端口
     uint32 start_time_tv_sec = 30;					//开始时间（秒）
-    uint32 start_time_tv_usec = 31;	//开始时间（毫秒）
+    uint32 start_time_tv_usec = 31;					//开始时间（微秒）
     uint32 end_time_tv_sec = 32;					//结束时间（秒）
-    uint32 end_time_tv_usec = 33;	//结束时间（毫秒）
+    uint32 end_time_tv_usec = 33;					//结束时间（微秒）
     int64 server_translate_time = 34;				//服务器传输时间
     uint32 server_response_start_time_tv_sec = 35;	//服务器响应开始时间（秒）
-    uint32 server_response_start_time_tv_usec = 36;	//服务器响应开始时间（毫秒）
+    uint32 server_response_start_time_tv_usec = 36;	//服务器响应开始时间（微秒）
     uint32 server_response_end_time_tv_sec = 37;	//服务器响应结束时间（秒）
-    uint32 server_response_end_time_tv_usec = 38;	//服务器响应结束时间（毫秒）
+    uint32 server_response_end_time_tv_usec = 38;	//服务器响应结束时间（微秒）
     int64 server_response_time = 39;				//服务器响应时长
     int64 client_translate_time = 40;				//客户端响应时长
     int64 locate_server_translate_time = 41;		//本地服务传输时长
     int64 locate_server_response_time = 42;			//本地服务响应时长
     int64 locate_client_translate_time = 43;		//本地客户传输时长
-    string x_requested_with = 44;
-    string operating_sytem = 45;	//操作系统
+    bytes x_requested_with = 44;					//
+    bytes operating_sytem = 45;						//操作系统
     uint32 server_res_code = 46;					//服务器返回状态
-    string browser = 47;	//浏览器名称
+    bytes browser = 47;								//浏览器名称
     int32 is_uncomplete = 48;						//数据完整性
     uint32 time_flag = 49;							//时间戳
-    uint32 detail_msg_len = 50;	//业务纤细信息长度
-    uint32 key_msg_len = 51;	//业务关键字长度
+    uint32 detail_msg_len = 50;						//专属指标值长度
+    uint32 key_msg_len = 51;						//区分子业务参数值长度
     uint32 req_len = 52;							//请求数据长度
     uint32 res_len = 53;							//响应数据报长度
     uint32 cookie_len = 54;							//cookie长度
     uint32 begin_url_len = 55;						//主URL长度
     uint32 refer_url_len = 56;						//引用URL长度
-    uint32 remain_len = 57;
-    string bussiness_detail_mesg = 58;	//业务纤细信息
-    string bussiness_key_mesg = 59;	//业务关键字
-    string req_data = 60;	//请求详情报文
-    string res_data = 61;	//响应详情报文
-    string cookie_data = 62;	//cookie详情报文
-    string begin_url = 63;	//主url详情
-    string refer_url = 64;	//引用url详情
-    string remain_data = 65;
+    uint32 remain_len = 57;							//保留字段值长度
+    bytes bussiness_detail_mesg = 58;				//专属指标
+    bytes bussiness_key_mesg = 59;					//区分子业务参数
+    bytes req_data = 60;							//请求详情报文
+    bytes res_data = 61;							//响应详情报文
+    bytes cookie_data = 62;							//cookie详情报文
+    bytes begin_url = 63;							//主url详情
+    bytes refer_url = 64;							//引用url详情
+    bytes remain_data = 65;							//保留字段
 }

Processor.proto

@@ -0,0 +1,24 @@
+syntax = "proto3";
+
+import "google/protobuf/any.proto";
+ 
+option java_multiple_files = false; //不要拆分成多个文件
+option java_package = "com.yuandian.dataflow.proto";
+option go_package = "../grpc-gen;grpcgen";
+ 
+package dataflow;
+ 
+message ProcessorResponse {
+    int32 code = 1; // 返回的状态码
+    string message = 2; // 消息
+}
+
+message PacketsProcessorRequest {
+    int32 type = 1; // 请求类型.  默认 为 1.  暂无意义
+    string version = 2; // 请求版本.  区分版本. 非必要时不使用 
+    repeated google.protobuf.Any packets = 3; // 请求的可变参数. 暂不使用
+}
+ 
+service ProcessorServer {
+    rpc AllPackets (PacketsProcessorRequest) returns (ProcessorResponse);
+}

QoeFlow.proto

@@ -11,43 +11,43 @@ package dataflow;
 
 message QoeFlow {
    int32 table_id = 1;						//编号18
-   IPAddress src_ip = 2;
-   IPAddress dst_ip  = 3;
-   uint32 s_tv_sec = 4;
-   uint32 s_tv_usec = 5;
-   uint32 l_tv_sec = 6;
-   uint32 l_tv_usec = 7;
-   uint32 dst2_respon_num = 8;
-   uint32 dst2_fast = 9;
-   uint32 dst2_fast_expected = 10;
-   uint32 dst2_expected_degrated = 11;
-   uint32 dst2_degrated_service = 12;
-   uint32 dst2_service_availability = 13;
-   uint32 dst2_respon_timeout = 14;
-   uint32 dst2_respon_success = 15;
-   uint32 dst2_respon_fail = 16;
-   uint32 dst2_respin_peek = 17;
-   uint32 dst2_respon_average = 18;
-   uint32 cs_window = 19;
-   uint32 sc_window = 20;
-   uint32 cs_reset = 21;
-   uint32 sc_reset = 22;
-   uint32 cs_retran = 23;
-   uint32 sc_retran = 24;
-   uint32 app_id = 25;
-   uint32 app_group_id = 26;
-   uint32 probe_if = 27;
-   uint32 app_style = 28;
-   uint32 time_flag = 29;
-   uint32 conn_setup_tm = 30;
-   uint32 data_transfer_tm = 31;
-   uint32 retrans_delay_tm = 32;
-   uint32 network_inbound = 33;
-   uint32 network_outbound = 34;
-   uint32 new_session = 35;
-   uint32 user_events = 36;
-   uint32 server_events = 37;
-   uint32 conn_setup_peek = 38;
-   int32 vlan_id = 39;
+   IPAddress src_ip = 2;					//< source ip
+   IPAddress dst_ip  = 3;					//< destination  ip
+   uint32 s_tv_sec = 4;						//< start time
+   uint32 s_tv_usec = 5;					//< start time
+   uint32 l_tv_sec = 6;						//< last update time
+   uint32 l_tv_usec = 7;					//< last update time
+   uint32 dst2_respon_num = 8;				//< response number      (dst->src)
+   uint32 dst2_fast = 9;					//< fast response        (dst->src)
+   uint32 dst2_fast_expected = 10;			//< fast expected        (dst->src)
+   uint32 dst2_expected_degrated = 11;		//< expected degrated    (dst->src)
+   uint32 dst2_degrated_service = 12;		//< degrated service     (dst->src)
+   uint32 dst2_service_availability = 13;	//< service availability (dst->src)
+   uint32 dst2_respon_timeout = 14;			//< response timeout     (dst->src)
+   uint32 dst2_respon_success = 15;			//< response success     (dst->src)
+   uint32 dst2_respon_fail = 16;			//< response fail        (dst->src)
+   uint32 dst2_respin_peek = 17;			//< response peek time   (dst->src) ms
+   uint32 dst2_respon_average = 18;			//< response average time(dst->src) ms
+   uint32 cs_window = 19;					//< cs window event
+   uint32 sc_window = 20;					//< sc window event;
+   uint32 cs_reset = 21;					//< cs reset
+   uint32 sc_reset = 22;					//< sc reset
+   uint32 cs_retran = 23;					//< cs retran
+   uint32 sc_retran = 24;					//< sc retran
+   uint32 app_id = 25;						//< application idectification
+   uint32 app_group_id = 26;				//< application group idectification
+   uint32 probe_if = 27;					//探针编号
+   uint32 app_style = 28;					//< application style
+   uint32 time_flag = 29;					// <time flag
+   uint32 conn_setup_tm = 30;				//连接建立时间
+   uint32 data_transfer_tm = 31;			//数据传输时间
+   uint32 retrans_delay_tm = 32;			//数据重传时延
+   uint32 network_inbound = 33;				//网络响应时间(客户端->服务器)
+   uint32 network_outbound = 34;			//网络响应时间(服务器->客户端)
+   uint32 new_session = 35;					//新会话数
+   uint32 user_events = 36;					//用户事件
+   uint32 server_events = 37;				//服务事件
+   uint32 conn_setup_peek = 38;				//连接建立时间峰值
+   int32 vlan_id = 39;						//链路编号
 
 }

UsrFlow.proto

@@ -12,34 +12,34 @@ package dataflow;
 message UsrFlow {
 
     int32 table_id = 1;					//编号19
-    uint32 probe_if = 2;
-    IPAddress server_ip = 3;
-    IPAddress client_ip = 4;
-    uint32 client_port = 5;
-    uint32 client_rtt = 6;
-    uint32 server_rtt = 7;
-    uint32 s_tv_sec = 8;
-    uint32 s_tv_usec = 9;
-    uint32 e_tv_sec = 10;
-    uint32 e_tv_usec = 11;
-    uint32 server_think = 12;
-    uint32 page_size = 13;
-    uint32 app_id = 14;
-    uint32 app_group_id = 15;
-    string request_url = 16;
-    string referer_url = 17;
-    uint32 return_code = 18;
-    uint32 err_tv_sec = 19;
-    uint32 err_tv_usec = 20;
-    uint32 client_loss_pkt = 21;
-    uint32 server_loss_pkt = 22;
-    uint32 client_bytes = 23;
-    uint32 server_bytes = 24;
-    uint32 client_packets = 25;
-    uint32 server_packets = 26;
-    string user_agent = 27;
-    string content_type = 28;
-    uint32 request_transfer_tm = 29;
-    uint32 time_flag = 30;
+    uint32 probe_if = 2;				//探针抓包口
+    IPAddress server_ip = 3;			//服务端ip地址
+    IPAddress client_ip = 4;			//客户端ip地址
+    uint32 client_port = 5;				//客户端端口
+    uint32 client_rtt = 6;				//客户端rtt
+    uint32 server_rtt = 7;				//服务端rtt
+    uint32 s_tv_sec = 8;				//< start time
+    uint32 s_tv_usec = 9;				//< start time
+    uint32 e_tv_sec = 10;				//< end time
+    uint32 e_tv_usec = 11;				//< end time
+    uint32 server_think = 12;			//
+    uint32 page_size = 13;				//
+    uint32 app_id = 14;					//< application idectification
+    uint32 app_group_id = 15;			//< application group idectification
+    bytes request_url = 16;				//
+    bytes referer_url = 17;				//
+    uint32 return_code = 18;			//
+    uint32 err_tv_sec = 19;				//
+    uint32 err_tv_usec = 20;			//
+    uint32 client_loss_pkt = 21;		//
+    uint32 server_loss_pkt = 22;		//
+    uint32 client_bytes = 23;			//
+    uint32 server_bytes = 24;			//
+    uint32 client_packets = 25;			//
+    uint32 server_packets = 26;			//
+    bytes user_agent = 27;				//
+    bytes content_type = 28;			//
+    uint32 request_transfer_tm = 29;	//
+    uint32 time_flag = 30;				// <time flag
 
 }